AQUAFIX Light Liquid separators
Steel coalescence separators for the pretreatment of petroleum and readily settling suspended solids.
Our solutions – your benefits – steel oil/water separators integrated in AQUAFIX settling tanks
High-capacity steel separators are most often used in areas where there is a very high volume of polluted wastewater run-off. The water flowing out of the separator is cleaned to a high degree in accordance with EN 858. The separator is made of A573 steel with a minimum thickness of 6 or 7 mm. The inner surfaces of the separator tank are protected with a coating resistant to substances contained in rainwater. The external surface of the separator tank is protected against corrosion.
-
Coatings to protect the tank inside and outside
-
Wide capacity range from 15 to 4000 l/s
-
Units available with 5-fold and 10-fold by-pass
-
Integrated settling tank
-
Compliance with EN 858
-
Separation chamber equipped with a multi-stream coalescing filter
The HAURATON Product Finder
You are in the category „“. There are no matching products to your selection here. You may find suitable products for your specific search in another category.
There are no matching products for your selection. Please select other filters in the product finder.
You are in the category „“. There are no matching products to your selection here. You may find suitable products for your specific search in another category.
There are no matching products for your selection. Please select other filters in the product finder.
Construction of steel oil separators
Each tank has 2 manholes with a diameter depending on the model (separators with a diameter of 1,250 mm have manholes with a diameter of 625 mm, others with a diameter of 1,000 mm). The separators are not equipped with manholes. The internal tank is divided by appropriately shaped baffles into three chambers: a settling chamber, a flotation chamber equipped with a multi-pass coalescing filter and an outflow chamber. All separators are equipped with a siphoned discharge element and a float, which acts as an automatic shut-off to prevent the outflow of accumulated oil substances in the separator when their permitted thickness is exceeded.
Application areas for AQUAFIX steel separators
Steel hydrocarbon separators are capable of handling large rainwater flows and are therefore used in areas with large catchment areas, such as roads, airports, factories or logistics centres.
